Radio Supply Connector

[Tri 250]

1973 TR6 CF10129U Mfg Date July 1973

No evidence of pigtail on this car. All wires leading from ignition switch are tie back into the main...

[Tri 250]

1973 TR6 CF10129U Mfg date July 73

Car has white/pink wire connecting to heater switch with pigtail and bullett connector as pictured...

[Tri 250]

Good idea, Ken, and I was thinking the exact same thing. The other option I was thinking about was to run a green wire from the voltage stabilizer over...

[Tri 250]

Jim

Interesting comment about the radio accessories in 74. Cool stuff! I learned something new. I guess this explains why I have seen antenna...

[Tri 250]

This afternoon, I tested the white/pink wire that was connected to the back of the heater fan switch. After looking closely at the ignition switch, I...

[Tri 250]

OK. My switch may be worn which might be the reason I'm not getting the click for the accessory position. I'll check this afternoon and put a tester...

[Tri 250]

Later switch diagram - posted earlier switch in error. Is position 1 accessed with key turned to left?...

[Tri 250]

As best I can tell, there is only one turn of the ignition switch to "IGN/ON" before providing power to the starter (i.e. no accessory position...

[Tri 250]

Hi Jim

Thanks for your response. The wire leading back to the fan motor is the green/yellow wire (attached pics). It's hard to see from...

[Tri 250]

I acquired a 73 TR6 in August 2020 and am just beginning to sort through some of the electrical issues. The heater fan was first on my list. Got a fried...